Pegasus — 4 (Four) Post Lift 19,000 LB. (8.6T)

Model Number: LSS4P19FDXL

The Pegasus is a medium-duty 4 (four) post service lift designed in North America to provide general automotive service to light trucks and other commercial vehicles. It offers a lifting capacity of 19,000 lb. (8.6T) and features double-wall runways with Z-rails.

Built to Higher Quality Standard

• North American-made Bucher 2HP / 1.5kw power unit.

Corrosion-Resistant Protection

• Steel components are wheelabrator shot blasted and acid washed before a double bake powder coat finish is applied.

Superior Structural Strength

• Provides longer life and more precise alignments.
• Non-flex double-wall 23” / 584mm wide runways with built-in Z-rail.
• Heavy-duty 10” x 8-3/8” x 1/4” wall / 254mm x 213mm x 6mm wall columns and 3” x 8-1/4” / 72mm x 210mm tube traverse beams.

Premium Options and Accessories Expand Capabilities and Service Life

• Stainless steel radius plates and rear steer plates.
• Built-in tire inflation hoses.
• Removable work steps.
• LED runway lighting.
• Premium, long-life HD jacking beams with 5-year warranty.

Lower Maintenance Costs

• Zirk-style grease fittings at all 1-1/2” / 38mm plated hinge pins.
• Runway under rear slip plates is open to prevent water and dirt from collecting.
• Thirty 7/8” / 22mm enclosed and plated steel slip-plate balls provide better support with minimal maintenance.

Extended Life Non-Twist Cable Design

• Machined steel nickel-plated 9” / 229mm pulleys with bronze self-lubricating bushings.
• Non-spin fatigue resistant 9/16” / 14mm cables are routed on double stacked pulleys (versus four stacked) to reduce stress and wear.

Low-Pressure Hydraulics Provide Longer Life

• 4”ID x 65” /102mm ID x 1651mm cylinder is mounted under the runway
• Cylinder uses a premium Parker seal and wear ring with chrome-plated plunger shaft.

Designed for Optimum Productivity

• Single point control with stainless steel cylinder air releases to engage 12 locking positions.
• Adjustable locking ladders 81” x 2-3/4” x 3/8” / 2057mm x 70mm x 9.5mm thick allow for accurate levelling.
• The power unit can be mounted on a front or rear column.
• Built-in runway compressed air outlets front and rear.

More Options to Choose From

• Available in two runway lengths of 210” (5334mm) or 238” (6033mm) with built-in wheel alignment or service deck.
• The lift can be ordered in red or blue colours.