Love Your Car? Get the Right Lift

Toll-Free : (866)-799-5438

“DAKOTA” 12,000 LB.(5.5T) Symmetric or Asymmetric

MODEL NUMBERS :

Asymmetric LSS2P12CFA

Symmetric LSS2P12CFS

Medium Duty Commercial Lifts Capable of Safely Servicing Vehicles Small and Large

Product Description

  • Corrosion resistant protection - steel components are wheel-a-brator shot blasted and acid washed before a “double bake” powder coat finish is applied.
  • Lifts higher to provide more under car work area - the 70-1/2’” / 1791mm long cylinder stroke provides 76” / 1930mm lift without adapters with a maximum attainable lift height of 87” / 2210mm.
  • Flexible vehicle loading - Flexmetric arm design uses three (3) piece “offset” front and straight (3) piece rear lifting arms for optimum asymmetric and symmetric loading opportunities.
  • Reduced installation costs - field adjustable height and width can easily adapt to most installation dimensions. Premium North American Components - North American made Bucher 2HP / 1.5kw power unit, 3/8”/9.5 equalizing cables and 2” / 51mm ID hydraulic cylinders provide longer more dependable service life.
  • Reduced vehicle setup time - Acme screw “drop in” style lift pads have a lowered height with rubber pad of 4” / 102mm and can be extended by 1-1/2” / 38mm, 3” / 76mm or 6” / 152mm using nickel plated drop in adapters. Power unit can be installed on either column.
  • Quieter operation less than <75 decibels - rubber mounting grommets reduce power unit noise. Car door protection - 11” x 2” / 279mm x 51mm rubber door bumpers are mounted on the face of both lifting carriages to reduce door damage.
  • More models to chose from - standard Flexmetric design with 3 piece lifting arms, symmetric version with equal length straight arms, and choice of red or blue.
ASYMMETRIC SYMMETRIC
Capacity 12,000 lbs. / 5.5T
Overall Height 158-7/8” / 4035mm 154-7/8 3934mm
Under Bar Clearance 149-1/2” / 3797mm 149-1/2” / 3797mm 153-1/2” / 3899mm
Overall Width 137-1/8” / 3483mm 145-1/8” / 3686mm 145-1/8” / 3686mm
Width Between Columns 109-3/4” / 2788mm 109-3/4” / 2788mm 117-3/4” / 2991mm
Drive Thru Width 89-1/8” / 2264mm 89-1/8” / 2264mm 97-5/8” / 2480mm
Height to Lowered Lift Pad 4" / 102mm
Raised Height with Standard Pad 74" / 1880mm
Raise Height with Adapters 86-5/8” with 3” & 6” adapter / 2200mm with 76mm & 152mm adapter
Off Set Front Arm Reach 21” to 39-3/4” / 533mm to 1010mm 35” to 59-5/8” / 889mm to 1515mm
Straight Rear Arm Reach 35” to 59-5/8” / 889mm to 1515mm
Standard Power Requirements 230 Volts - 60 Hz - 1PH - 20 Amp
Shipping Weight 2,300 lbs./ 1T
     
Two piece adjustable front and rear for either asymmtric or symmetric loading Drop in screw adjustment style lifting pads Height adapters
     
3/8” / 9.5mm non fatigue cables with 3-1/2” / 89mm pulleys Adjustable Height Single point lock release
*Information and product specifications are subject to change without notice